KMT McCartney LDPE Valves and Plungers
Dual Let Down Valve and Vent Valve
This unique design configuration combines the Product and Vent Valve, allowing for a very compact and efficient valve package. The dual valve design reduces the length of “dead leg” gas to an absolute minimum, greatly reducing related problems such as gas degradation in that area.
The Let Down body mounts directly to an Autoclave Reactor discharge or it can be spooled to the Tubular line. Each of the mounting methods provide equally superb performance.
Each of the two valves is equipped with Bafco Inc™. Electropneumatic Actuators, insuring quick opening of the Vent and precise stem position on the Let-Down Valve.
A complete hydraulic power unit is available along with field manifolds to insure long and dependable service. Standard material for pressure-containing components such as body and inlet adapter is alloy steel forged to the special KMT McCartney specification #43-72. This superior material has provided long and dependable service with exceptional resistance to fatigue failure for nearly 30 years.
Each customer’s specific needs are considered in the valve trim design, including geometry and materials. Special attention is given to potential corrosion and erosion problems in the trim area. Each of the two valves can be configured to meet a customer’s specific process, mechanical, and material requirements.
All KMT McCartney valves can be custom designed for pressures up to 60,000 PSI (4.138 Bar).
High Speed Vent Valve
The KMT McCartney High Speed Vent Valve combines the 2-piece KMT McCartney vent valve design and pneumatic actuator with external manifold and oversize solenoid valve.
The unique pneumatic actuator design allows for “stacking” of the 12” diameter pistons up to a total of six, reducing spare parts inventory.
Optional manual lock is available, providing an additional measure of safety during maintenance. Standard material for pressure containing components such as body and inlet adapter is alloy steel forged to the special KMT McCartney specification #43-72. This superior material has provided long and dependable service with exceptional resistance to fatigue failure for nearly 30 years. The KMT McCartney valve can be configured to meet a customers specific process, mechanical, and material requirements.
Valve assemblies can be custom designed to meet specific operating requirements for pressures up to 60,000 PSI (4.138 Bar).
Process Control Valves (PCV)
The KMT McCartney PCV is a modern design of the Fisher CZA industry workhorse. This valve is dimensionally interchangeable with valves in service today.
The internal configuration is a KMT McCartney stem and seat design. High wear resistance and high corrosion resistance was a prime consideration during the design of the PCV. Simple, robust construction has fewer parts and is more easily refurbished than other valves.
The two-piece body design was chosen to ensure less maintenance while an even higher reliability will be achieved. Routine maintenance can be done easily by on site staff.
A very specialized alloy steel material, forged to KMT McCartney #43-72 specifications, was chosen for its workability and high-pressure performance. A 15-5PH stainless steel option is available when corrosion is a problem. Seat material is nitrided for increased life and corrosion resistance during service in your toughest applications. There is no cage to remove as part of a valve rebuild.
The PCV can be fitted with a variety of actuators. Bafco™ electrohydraulic actuators take full advantage of the sophisticated process control systems in use today. KMT McCartney pneumatic piston type and saginaw style actuators can also be used. We will be happy to consider other actuator options upon request.
Positive Position Process Control Valve
The KMT McCartney Positive Position Process Valve incorporates the Limitorque™ L120 Series electric 
motor driven gear actuator. This robust KMT McCartney/Limitorque™ combination eliminates unintended valve cycling and provides dependable service day after day under the most demanding conditions. The L120 actuator is available in weatherproof and explosionproof configurations. An internal clutch provides dependable control of stem load to greatly reduce the possibility of damage to the stem and seat due to overloading. Handwheels are furnished for manual operation in the event of power failure. The de-clutch lever is padlockable in the motor position.
Standard material for pressure containing components such as body and inlet adapter is alloy steel forged to the special KMT McCartney specification #43-72. This superior material has provided long and dependable service with exceptional resistance to fatigue failure for nearly 30 years. The KMT McCartney valve can be configured to meet a customers specific process, mechanical, and material requirements.
Valve assemblies can be custom designed to meet specific operating requirements for pressures up to 60,000 PSI (4.138 Bar).
Check Valves & Gear Driven Valves
Manual Gear Actuated Valve
All KMT McCartney designed valves are available with 3:1 or 6:1 ratio gear actuators. Housings are made of steel, precisely machined internally to accept precision steel drive and pinion gears. Bronze bearings provide smooth operation of the hand-wheel and actuator stem. The actuators are capable of producing stem loads up to 50,000 lbs. (22.700 kg) with a hand-wheel torque of 100 ft-lbs. or less.
Valve configurations including angle and parallel flow are available, each being designed and manufactured to meet specific customer requirements.
Standard material for pressure-containing components such as body and inlet adapter is alloy steel forged to the special KMT McCartney specification #43-72. This superior material has provided long and dependable service with exceptional resistance to fatigue failure for nearly 30 years. The KMT McCartney valve can be configured to meet a customer's specific process, mechanical, material requirements, and custom designed to meet specific operating requirements for pressures up to 60,000 PSI (4.136 bar).
Inline Poppet Check Valve
KMT McCartney’s new poppet check valve was designed to address the “hot check” problem common to many hyper compressor lubrication systems. Other applications include initiator delivery lines and reactor entry points. The new valve offers a larger contact surface, which provides a more positive seal while resisting the inclination to brinell at the point of contact. The new internal design positions the spring around the outside diameter of the poppet guide.
This provides the spring with extra support while allowing flow to move around and not through the spring. The use of 15-5PH stainless steel material for the bodies, seat, and poppet guide provide excellent resistance to fatigue, corrosion, and fluid contamination. Extensive testing indicates this combination extends the service life 4 – 10 times over that of a conventional ball and seat design. Inlet and outlet connections are available in standard 9/16”, 1/4” and 3/8” HP sizes. Special connection designs are available upon request. Design Criteria: 60 GPH (227 l/hr) at 60,000 PSI (4.136 bar).
Block Check Valve
The KMT McCartney Block Check Valve is a poppet design in-line valve available with removable seat. Standard material for pressure containing components such as the valve body and inlet/outlet adaptor is alloy steel forged to the special KMT McCartney specification #43-72. This superior material has provided long and dependable service with exceptional resistance to fatigue failure for
nearly 30 years. Internal components including the poppet, poppet guide, and removable seat are made of AISI 4340.
Block Check Valves can be configured to meet specific process, mechanical, and material requirements for pressures up to 60,000 PSI (4.136 bar).
Plungers
KMT McCartney has full carbide plunger fabrication capabilities to grind and finish a wide variety of plungers from 250” – 4.00” (6.4 mm – 101 mm). Using Ke-nametal™ carbide blanks, we commonly grind and polish plunger OD surfaces to 1-2 RMS finish.
We also provide O.D. regrind and polish service for worn plungers of all sizes.