KMT McCartney PF-3 Phase Flow Pump Delivers Maximum Production!
The McCartney PF-3 Phase Flow Intensifier is the latest breakthrough in intensifier technology and another example of KMT McCartney’s commitment to the advancement of Polyethylene Initiator Injection Pump Technology.
The McCartney PF-3 Intensifier features three side by side piston/plunger assemblies that operate with the same industry leading McCartney Phase Flow Control as the PF-1.
However, the PF-3 offers an additional Service Mode feature for use when service of High Pressure components is required on any one of the three topworks. With this feature, the field operator can indefinitely idle and lock out the topworks needing service without interrupting flow of initiator fluid from the pump skid! Service Mode is enabled from the local control panel.
The design of the PF-3 results in a slower cycle rate than conventional reciprocating style intensifiers and normal PF-1’s, resulting in fewer pressure cycles on the cylinder components and check valves. The slow, steady plunger movement will result in extended life of the patented, non-adjustable pressure seals. Overall reliability is very good, with seal life in excess of 9,000-27,000 hours and a 98% on-line time being achieved by users.
For Large LDPE Processing Facilities, the PF-3 Provides the Reliability Needed and Much More:
- Extreme Pressure Signal Stability Eliminates Pressure Drop
- 98% On-line Time Being Achieved by Users
- Advanced Electronic Controls for Faster Response Time
- Self Monitors Seals and Check Valves - Seal Life in Excess of 9,000-12,000 hours!
- Remote Monitoring, Remote Control and Simplified Maintenance
- High Pressure Components Designed Specifically for 60,000psi/4137bar
- Fault Warning Indicator Decreases Down Time
- Slow Stroking Extends Lifetime of Components
KMT McCartney Phase Flow Pump Visualization
The KMT McCartney Phase Flow Pump Visualization allows the customer, to receive important information of the pump status in real time using an external Computer or Laptop. One easy plug-in attachment from the Computer to the Motion Controller relays a clear & concise view of the important program values in real time. This vital tool will help you save money and down time if there are any system problems, and because trouble shooting is much faster, it also saves time after maintenance work when checking the calibrations and signals before starting back up production.
This LDPE pump visualization is available for all KMT Phase Flow Pumps with the new Motion Controller or can be upgraded on our older pumps. Contact us for more information on this time-saving device and other ways KMT McCartney can save you time and money in your LDPE poly pellet production.
KMT MCartney Phase Flow Poly Pump Visualization EXAMPLE